-
4-20mA 플러시 디아프라그마 압력 변환기 100MPa 실리콘 디아프라그마 압력 센서
BPHT24 4-20mA flush diaphragm pressure sensor transducer BPHT24 Pressure Transmitter Introduction: BPHT24 4-20mA flush diaphragm pressure sensor transducer is based on piezoresistive effect. Inside, there is a layer of diffused silicon film, when subjected to external pressure, the silicon film will undergo small deformation, thereby changing its resistance value. By measuring the change of the resistance value of the silicon film, the pressure of the measured medium can be
-
50.4mm 플러시 디아프라그마 압력 센서 클램프
50.4mm clamp to install large diaphragm high temperature transmitter BP93420-IQT High Temperature Flush Pressure Sensor Introduction of flush diaphragm pressure sensor : The diffusion silicon sensor technology has the characteristics of high precision, high stability and high reliability. The clamp flat film structure can adapt to the measurement of a variety of media, has good linearity and repeatability, has a wide operating temperature range, can adapt to the measurement
-
안정적 플러시 디아프라그마 압력 송신기 SS304 고정도 압력 센서
Product Description Sanitary chuck connected to pressure transmitter BP93420-IQT Pressure Transmitter Introduction of Flush Diaphragm Pressure Sensor : BP93420-IQT clamp flush diaphragm pressure transmitter is a device used to measure and convert pressure signals. It adopts clamp type flat film sensing technology, which can accurately measure the pressure of various liquids and gases, and has high precision, stability and reliability. It also has a variety of measurement
-
316L 분산 실리콘 압력 센서 클램프 대막 압력 송신기
HT Diffused Silicon Pressure Resistance Clamp Diaphragm Pressure Transmitter BP93420-IQ Pressure Transmitter Introduction: BP93420-IQ pressure transmitter utilizes the HT series silicon pressure-resistance isolation oil-filled core as the signal measuring element. It features a full metal flush diaphragm and direct welding with the process connection, ensuring precise connections between the process connection and the measuring diaphragm. The entire product has undergone
-
4-20mA 위생 플러시 디아프라그마 압력 센서 BP93420-IQT 공기 물 오일 테스트
High temperature Sanitary Flush Diaphragm Pressure Sensor BP93420-IQT For Air Water Oil Test BP93420-IQT Pressure Transmitter Introduction of flush diaphragm pressure sensor: BP93420-IQT 50.4mm clamp to install large diaphragm high temperature transmitter The signal processing circuit is located inside a stainless steel housing, converting the sensor signal into a standard output signal. This pressure transmitter is primarily used in places where high sanitary conditions are
-
304SS 플러시 디아프라그마 압력 센서 식품 음료용 위생 압력 송신기
Stainless Steel 4 20mA Sanitary Pressure Transmitter Flush Diaphragm Pressure Sensor BP93420-IQT Pressure Transmitter Introduction of Flush Diaphragm Pressure Sensor: The BP93420-IQT is equipped with a φ50.4mm large diaphragm high-temperature transmitter signal processing circuit, which is installed in a stainless steel housing to convert the sensor signal into a standard output signal. This pressure transducer is primarily used in high sanitary conditions to ensure reliable
-
고온 4-20mA 위생 압력 송신기 플러시 대막 압력 송신기
High Temperature 4-20mA Sanitary Pressure Transmitter Flush Diaphragm Pressure Sensor BP93420-IQT Pressure Transmitter Introduction of Flush Diaphragm Pressure Sensor: The BP93420-IQT pressure transmitter incorporates the HT series silicon pressure-resistance isolation oil-filled core as its signal measuring component. It is designed with a full metal flush diaphragm and directly welded to the process connection, ensuring accurate and reliable connections between the two. The
-
헝통 4-20mA 압력 센서 Bp93420-Iqt 음료 식품 송신기 중국
Hengtong BP93420-IQT 압력 트랜스미터는 316L 스테인레스 스틸 구조로 0.5%의 높은 정확도를 제공합니다. IP65 등급, 넓은 압력 범위(-100kPa~3.5MPa) 및 다중 출력 신호가 특징입니다. 맞춤형 옵션이 제공되므로 음료, 식품, 제약 산업에 이상적입니다.
